Jan 17, 2023 | Knowledge Base, Starters
The following general information has been assembled as a guide for starter removal and installation. Refer to the appropriate Original Equipment Manufacturer’s service manual for specific information pertaining to starter removal and installation procedures and...
Jan 17, 2023 | A/C Compressors, Alternators, Knowledge Base, Starters
Accumulator / Receiver-DrierAn accumulator / receiver-drier stores refrigerant while removing moisture and dirt the refrigerant may contain. CompressorThe compressor is a pump that raises refrigerant pressure, which raises its temperature. High-temperature refrigerant...
Jan 17, 2023 | Alternators, Knowledge Base, Starters
Add-on RegulatorSome alternators use an add-on type regulator that is mounted on the outside of the alternator housing. AlternatorA belt driven device that creates electrical current for maintaining the charge state of the battery and the electrical requirements for...
Jan 17, 2023 | Double Platinum, Iridium Long Life, Iridium Power, Iridium Racing, Iridium TT, Knowledge Base, Original U-Groove, Platinum TT
Iridium Power Example: IK16 With an Ultra-fine Iridium Alloy Center Electrode Employing a high melting point iridium alloy for the center electrode tip, a fine diameter of 0.4mm has been realized. This fine electrode has led to a lower spark voltage and a large...
Jan 17, 2023 | Alternators, Knowledge Base, Starters
The following general information has been assembled as a guide for battery inspection and testing. Refer to the appropriate Original Equipment Manufacturer’s service manual for specific information pertaining to battery inspection and testing procedures and safety...
Jan 17, 2023 | Double Platinum, Iridium Long Life, Iridium Power, Iridium Racing, Iridium TT, Knowledge Base, Original U-Groove, Platinum TT
Iridium Power Gapping Tips Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart in the front of this catalog to verify the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with...
