Rear wiper blade installation instructions for DENSO Roc Lock 3 wiper arms, and conventional or designer style wiper blade connectors.
![Rear-Wiper-Blade-Roc-Lock-3-main](https://www.densoautoparts.com/wp-content/uploads/2022/09/Rear-Wiper-Blade-Roc-Lock-3-main.jpeg)
CAUTION: The replacement blade connector is made of RESIN. Please avoid excessive force and use care when removing and installing.
![Rear-Wiper-Blade-Roc-Lock-3-1](https://www.densoautoparts.com/wp-content/uploads/2022/09/Rear-Wiper-Blade-Roc-Lock-3-1.jpeg)
1. To remove, rotate wiper blade to proper angle to detach. CAUTION: Do not forcibly detach.
![Rear-Wiper-Blade-Roc-Lock-3-2](https://www.densoautoparts.com/wp-content/uploads/2022/09/Rear-Wiper-Blade-Roc-Lock-3-2.jpeg)
2. To install, align wiper blade center bar and pins to fit into wiper arm connector.
![Rear-Wiper-Blade-Roc-Lock-3-3](https://www.densoautoparts.com/wp-content/uploads/2022/09/Rear-Wiper-Blade-Roc-Lock-3-3.jpeg)
3. Adjust and snap the center bar into the wiper arm
![Rear-Wiper-Blade-Roc-Lock-3-4](https://www.densoautoparts.com/wp-content/uploads/2022/09/Rear-Wiper-Blade-Roc-Lock-3-4.jpeg)
4. Rotate blade to closed position