Close ×
Find a Part By:

Searching for your parts in the DENSO part catalog is easy. Simply select the type of part you are looking for along with the year/make/model of your vehicle.

    or

    Search for cross reference part numbers for other manufacturers of the parts you're looking for.

    Cross Reference information is provided as a guide only. Please refer to the "Applications" lookup tabs for more detail. Materials and designs will differ among brands, so plugs are not exactly alike. Always check with your OE service manual for proper installation and settings.

    Rear wiper blade installation instructions for DENSO Snap Claw wiper arms, and conventional or designer style wiper blade connectors.
    *use of enclosed connector required.

    1. To remove, rotate wiper blade to angle shown, and pull wiper blade from arm connector.

    2. To install, align replacement wiper blade center bar to wiper arm connector.

    3. Push wiper blade center bar against wiper arm connector until clicks into place.

    4. Rotate blade into position against wiper arm.