Oct 23, 2022 | First Time Fit Wipers, Knowledge Base
Rear wiper blade installation instructions for DENSO Slide Pinch wiper arms, and conventional or designer style wiper blade connectors. 1. To remove, pinch clips and pull blade away from arm 2. To install, insert blade connector at an angle as shown until pin on blade...Oct 23, 2022 | First Time Fit Wipers, Knowledge Base
Rear wiper blade installation instructions for DENSO Snap Claw wiper arms, and conventional or designer style wiper blade connectors.*use of enclosed connector required. 1. To remove, rotate wiper blade to angle shown, and pull wiper blade from arm connector. 2. To...Oct 23, 2022 | First Time Fit Wipers, Knowledge Base
Wiper blade installation instructions for DENSO Side Lock, or Side Pin wiper arms, and beam style wiper blade connectors. 1. Install, slide wiper blade onto pin 2. Slide wiper blade completely onto pin 3. Rotate wiper blade for final install 4. Installation...Jan 17, 2023 | Double Platinum, Iridium Long Life, Iridium Power, Iridium Racing, Iridium TT, Knowledge Base, Original U-Groove, Platinum TT
Iridium Power Example: IK16 With an Ultra-fine Iridium Alloy Center Electrode Employing a high melting point iridium alloy for the center electrode tip, a fine diameter of 0.4mm has been realized. This fine electrode has led to a lower spark voltage and a large...Jan 17, 2023 | Double Platinum, Iridium Long Life, Iridium Power, Iridium Racing, Iridium TT, Knowledge Base, Original U-Groove, Platinum TT
Iridium Power Gapping Tips Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart in the front of this catalog to verify the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with...Jan 16, 2023 | Iridium Long Life, Iridium Power, Iridium Racing, Iridium TT, Knowledge Base, Original U-Groove, Platinum TT
S Type of precious metal F Center: 0.55 mm diameter iridium. Ground electrode: 0.7 mm diameter platinum P Platinum plug S 0.7 mm diameter iridium SV 0.4 mm diameter iridium Z 0.55 mm diameter iridium W K Thread Diameter and Hex Size C 12×14.0 L 18×22.2...